Ensuring the Accuracy and Reliability of NDT Instruments, Probes and Standards

Welcome to our Calibration Services Landing Page for mobile devices 

Service Request

Calibrations by products

 

 

Our Calibration Services 

Calibration: Ensuring the Quality of Your Test and Measuring Results 

At FOERSTER, we understand the critical importance of accurate and reliable test and measuring results in non-destructive testing (NDT). Calibration lies at the heart of maintaining the integrity of your instruments, probes and standards. It involves comparing your measured values with traceable standards to guarantee precision and consistency. 

Calibration

Why Calibration Matters

Calibration is essential for demonstrating the high quality of your test and measurement results. It enables you to accurately quantify parameters such as coercive force, magnetic flux density, and permeability, providing confidence in the reliability of your NDT processes. Regularly recalibrating your systems and equipment ensures that your results meet industry standards and comply with regulations. 

Sample Certificates and Additional Specifications

To assist you in finding the precise calibration service you need, we provide sample certificates showcasing the norms covered in our calibration processes. These certificates offer valuable insights into the parameters we calibrate and the meticulous standards we adhere to. Furthermore, if your specific requirements extend beyond our standard calibration offerings, we offer the flexibility to accommodate additional specifications upon request. 

Calibration of sample - general
Factory Calibration Service

Our Comprehensive Factory Calibration Service

At FOERSTER, we offer a comprehensive factory calibration service designed to meet your specific needs. Our skilled technicians meticulously check your FOERSTER systems or devices for perfect function and compliance with performance parameters. This thorough calibration process ensures that the high quality of your products is maintained throughout their lifecycle. 

Transparent Repair Process 

In the rare event that a repair is required during the calibration process, we prioritize transparency and customer satisfaction. You will receive a detailed estimate before any work is carried out, ensuring that you are fully informed about the scope and cost of the repair. Our goal is to minimize downtime and swiftly restore your equipment to optimal working condition. 

Explore our range of calibration services today and discover the quality assurance that sets us apart. 

 

DEFECTOMETER

 

 

Article description

Order - Nr.

Sample

DEFECTOMETER 2.837

1459147

  

DEFECTOMETER M 1.837

1880756

SAMPLE
Electrical check of calibration block (3x notch) (2.142/ 2.154/ 2.164/ 2.835/ 2.836/ 2.837/ 1.837) 2325233

 
Dakks akkredited depth measurement of calibration block (3x notch) (1.837.01-11xx) 2345501

 
Depth measurement of calibration block (3x notch) (2.142/ 2.154/ 2.164/ 2.835/ 2.836/ 2.837/ 1.837) 2325241  
Electrical check of customer specific calibration block (1x notch) 2331390  
Conductivity measurement of calibration block at 60kHz (only Nfe, Ti, Aust) 2345587  
Depth measurement of customer specific calibration block (1x notch) 2331403  
Depth measurement of 1 test defect in customer specific part 2343673  

Calibration of 1 DEFECTOMETER probe

2826313

  

Calibration of 1 DEFECTOSCOPE probe

2244691

  

Calibration of 1 MAGNATEST probe

2244667

  

 

Article description comptab-infoalt7-icon
Order - Nr.
Sample
DEFECTOMETER H 2.835
1269240
DEFECTOMETER C 2.836, DEFECTOMETER 2.164
1269267
DEFECTOMETER 2.837
1459147
DEFECTOMETER M 1.837
1880756
SAMPLE
1 Calibration standard DEFECTOMETER 2.154/2.164/2.835/2.836/2.837/1.837
2222094
SAMPLE
1 Calibration set (AUST/FE/NFE/TI)
2244640
1 SCCS standard 2.887.01-9313/4/5/6-S
2219921
Calibration of bore hole standards
2244675 Per standard (1 hole)
SAMPLE
Calibration of bore hole standards
2244683 Add per bore hole
Calibration of 1 DEFECTOMETER probe
2826313
Calibration of 1 DEFECTOSCOPE probe
2244691
Calibration of 1 MAGNATEST probe
2244667

MAGNETOSCOP

 

Article description

Order - Nr.

Sample

MAGNETOSCOP 1.070 incl. probe

 2084970  
MAGNETOSCOP 1.070 2084988 SAMPLE
MAGNETOSCOP 1.070 probe 2084996  
MAGNETOSCOP 1.069 incl. probe 1805053  
MAGNETOSCOP 1.069 probe 2075024  
MAGNETOMAT 1.790 2161850  
MAGNETOMAT 1.790 probe 2084996  
MAGNETOMAT 1.782 incl. probe 1832328  
MAGNETOMAT 1.782 probe 2075032  
Reference standard permeability 1.070 (30kA/m) 2085003 SAMPLE
Reference standard permeability 1.068 / 1.069 (10kA/m) 1269291  
1-20 permeability measurements with certificate (µr 1.0-2.0) 2085038  
Permeability measurements from measurement 21 2085046  
1-20 field measurements with certificate 2085054  
Field measurements from measurement 21 2085062  

 

SIGMATEST

 

Article description

Order - Nr.

Sample

SIGMATEST 2.070 calibration instrument with probe and double standard

2257688

SAMPLE Instrument & probe

SAMPLE Conductivity standard German Silver

SAMPLE Conductivity standard Copper

SIGMATEST 2.070 calibration of 1 probe

2257700

 SAMPLE

SIGMATEST 2.069 calibration instrument with probe and double standard

1881647

SAMPLE Instrument & Probe

SAMPLE Conductivity standard German Silver

SAMPLE Conductivity standard Copper

SIGMATEST 2.069 calibration of 1 probe

2219824

SAMPLE
SIGMATST 2.069/2.070 calibration of 1 8mm flex probe 2219832

 

Readjustment of 1 probe (if the calibration of a probe failed 2.069/2.070)

2306735

SAMPLE SIGMATEST 2.070

SAMPLE SIGMATEST 2.069
Readjustment of 1 flex-probe (if the calibration of a probe failed 2.069/2.070) 2321629

 

Addon calibration (2.070/2.069 instrument): Measurement of the excitation frequencies

2306743

 SAMPLE

Addon calibration (2.070/2.069 probe or standard): Measurement with different limits (example: 1%IACS deviation)

 2306751 SAMPLE

Addon calibration (2.070/2.069 probe or standard): List of the 10 individual measurement values for each frequency

2306760

 SAMPLE
Addon calibration (probe):
10 manual measurements on 7 calibration blocks in the range between 14-64 %IACS		 2339803  
Addon calibration (probe):
Repeat the 10 manual measurements on 7 calibration blocks in the range between 14-64 %IACS after minimum 15 minutes		 2339811  

Conductivity measurement with certificate of a customer part (NPL)

2278120

 SAMPLE
Addon calibration (probe):
5 measurements on a calibration block with 48%IACS with a given lift-off height e.g. 75µm, 250µm or 500µm and having a difference smaller +-0.5%IACS		 2339838  
Addon calibration (external temperature sensor 2.069)
calibration at T1=20°C and T2=30°C with certificate		 2340836  

Addon calibration (2.070/2.069 probe or standard): Appendix for verified standards DGQT 4.2.0368 or AITM6-6008

2306778

SAMPLE AITM6-6008

SAMPLE DGQT 4.2.0368
Addon calibration (2.070/2.069 probe or standard):
Appendix for verified standard AITM6-6008

 

  
Addon calibration (2.070/2.069 probe or standard):
Appendix for verified standard IGC 04.25.120

 

  
Addon calibration (2.070/2.069)
One frequency (60kHz, 120kHz, 240kHz, 480kHz or 960kHz)		 2321637  
Addon calibration (2.070/2.069 probe or standard)
Integration of customer specific data afterwards or providing lost certificates again		 2322315  
Further standards must be verified on an individual basis.    

Calibration standard based on NPL (SIGMATEST 2.070) (5 frequencies)

2278111

 SAMPLE

Calibration standard based on PTB (SIGMATEST 2.069) (5 frequencies)

2826348

 SAMPLE
Addon calibration (probe):
Check if a slight manual pressure (5 measurements) does not cause a variation greater than +-0.5 %IACS on a calibration block with 48%IACS		 2339820  

Conductivity measurement with certificate of a customer part (PTB)

2306727

 SAMPLE

 

 

What is the difference between PTB and NLP?
Find out more here.

SONODUR

 

Article description

Order - Nr.

Sample

Factory calibration of hand test probe with certificate

Note: includes the incoming inspection of the probe (does not include the incoming inspection & function test of the instrument) 

2229641

 SAMPLE

Incoming inspection & function test of instrument (e.g. SONODUR 3, MIC 10)

Note: Required if certification of the probe must state the specific instrument (otherwise a factory instrument will be used for the certification of the probe)

4990200

  

Calibration according to DIN 50159-2; DAKKS certificate for SONODUR instrument and 1 probe

Note: Requires factory calibration of the probe (2229641) and incoming inspection & function test of instrument (4990200) beforehand

2231115

 SAMPLE

 

TCM

 

Article description

Order - Nr.

Sample
TCM 2.142 calibration of instrument 2319993 SAMPLE

 

Want to know more ?

Request Demo